Air Cooling
To increase the efficiency of the cooling-heating elements are mounted in a large contact surface parts. These parts are also to remain in the air corridor to be created in the device placed in the device. Thus, the device passes through the air, the heat will be away from.To achieve this, some parts of the device cabinet to create holes or air channels. Their placement on the other hand will be released into the air in the form of a hand. Cooling efficiency is directly related to the air circulating within the device. If the instrument passes through the higher the cooling temperature of the air will be insufficient. Extremely cold weather in the concentration of water in the device (perspiration) will cause. In the air in the water and acid vapor, metal powders, other contaminants that accumulate in the air stream, where adhesion to the surfaces of the device fragments. With acidic materials that melt in time savings, other savings When combined with moisture in the device malfunctions, etc. lead to short-circuit electrical circuits.For this reason, air-cooled device should be considered in the selection of ambient air. Who do not want to give up the advantages of air-cooled system was developed some new ones for this kind of problems. i-Fresh Air Inlet: The easiest solution is applied to the devices to ensure fresh air entry. In this application, an air duct equipment air inlet holes are provided through the platform-independent supply of fresh air. Thus, the device remains in the materials and the environment, clean fresh air is fed. To use the pre-production stage of this system is specified, devices can be manufactured in accordance with the air intake. ii-Air Conditioning System: Another application of the closed-loop cooling system, air-conditioning technique. In this technique, no air entry and exit is not available on the device. The device is placed on the air conditioning unit, the unit cools the air in the ambient air separately.Thus, the device remains in the air constantly clean. Air conditioning in the heat on the parts inside the device through the device without the outward flow of an air is provided. In this application, the parts in contact with ambient air conditioning unit should be cleaned on a regular basis.The newly developed self-cleaning systems used in nano-technology products with more easier maintenance. With this system, giving up property, air-cooled device, plug and play installation is provided. However, this device will be reflected in a slight increase in the cost. |