Galvano Rectifiers
Microprocessor thyristor controlled rectifiers are fully automatic power supplies used to supply right current for processes like anodizing,painting,electrolized plating applied on metals and plastics in the industry. Thyristor control supervised by microprocessor gives high accuracy and sensitive regulation and obtains high quality result on the process.
One of the most important feature of thyristor controlled systems is Puls-Base current control. Plating reaches to the smallest recessions on the surface when it is done with Pulse-Base procedure and plating problem to non-reachable areas is solved. In addition to proportional distribution on plating, also saves from time. 600Hz and Pulse – Base medhods present much beter quality than tarditional platings New AC Drive Unit
MRS Plating rectifiers are equipped with the new AC power control unit. With this unit rectifier faults comes down to minimum as well as increases working yield and rectifier functions. With this new AC drive unit errors are prevented before they occur.Through this it can be used in even the most difficult circumstances safely.The new drive system has ability to work with remote control and automotion system at the same time.In addition to a large number of features, as well as additional features are also available to be made over time. Timer
With the timer on the program is is possible to set working for a limited time or continuously.On limited time rectifier works until till reaches to the desired value and stops automatically.At the end of process a warning warns the operator.On continuous working it goes on working until the operator ends the process.
Ampere/hour and Auto Dosing
MRS Plating rectifiers have ampere/Hour calculation feature. In this way the most reliable data were obtained about the process of working in the bathroom. Plating process can be adjusted with ampere/hour instead of time. Operator panel for both the coating process is ongoing as well as for the sum of all transactions are different counters. This counters can also be used to add chemicals to the pool automatically. Especially in critical baths the chemical concentration is very important.MRS rectifiers helps you for chemical control as well as giving information for working and yield of the system.
Selective working program
In most of the plating pools selective working program is used to remove undesired metals from the pool. But this process is made manually or by an external device.In MRS plating rectifiers this is done automatically with this selective working program.After the process starts, the output voltage is increased from zero and turns to zero again periodically.This process is repeated by definetely or indefinetely.In such way the selective working is done easily which is a very hard maintenance process.
Easy to use
MRS Standard Plating rectifiers have a very simple running program. With the remote control unit the operator can run the device without going near to it. The system is fully compatible with all automation systems which also can work either manually or with automation system together. Profibus DP Electro Plating
Cataphoresis Paint
Anodizing Plating
Aluminium Surface Treatments
Varnishing
Corrosion Prevention
Refining Operations
Chlorine Electrolysis
Electric Oil Import
Erosion
Metal Plating on Plastics
Operation: Manual operator panel / automation system
Control: MRS Microprocessor Control System
Input Voltage: 3x380 VAC, 50 Hz three-phase.
Output Voltage: Standard: 0 .. 25 VDC / Special design for over 25V
Output Current: 100 A - 50 kA
Ripple Factor:% 5 to 7
Measurement: TrueRMS Current - Voltage Measurements
Yield:% 80 to 95
Indicators: LCD Display, current, voltage, time, message amperehour imaging, Turkish / English language selection Output Control: 0 - 100% between the current - voltage regulation
Pulse - Base Control: Optional
Cooling: Air, Water, Oil, Mixed
Cabins: modular assembly, painted, standing or wheeled steel chassis
Win: Wave-walled, sanded, phosphated, interior and exterior painted, wheeled steel boiler
Transformer: High-efficiency, transformer MRS TSE
Color: RAL 7032 / Green
Programmed Operation: 10 Step - 10 Program / Option: 100 Program
Timer: Default
Amperehour Counter: Process and total amperehour counter, the set value, dosing information, programs to choose from within the ampereminute or amperesecond
Remote Control: External operator panel, with communication cable RS485, 1 km from a distance of portable, wireless 100 mt. up to a distance, with all functions
Warning: Failure and status information relays
Protection Features: Phase missing / over current / over temperature / short circuit / thyristor failure / diode failure
|