Pulse-Base
Obtained using the normal rectifier coating thickness, the material may be of different values in different parts. The average coating thickness of 15 microns is desired, this range can be up to 3 microns to 30 microns. A coating of about 30 microns to 15 microns of energy, time and chemical consumption is necessary. When used in pulse plating rectifier range is approximately 8-25. This also means that a 35% improvement. Normal rectifier, according to the location of the different thickness of coating material is suspended. Lower, middle and upper regions are different thicknesses. Pulse rectifier with staying out of this case and hung suspended in the pool with all the ingredients are evenly coated.Pulse technique applied to the current value in two different bathrooms. Generally, low value of the current value of the normal flow of the process according to the first, second is worth 20% - more than 200%. That the current values of the normal value on a normal rectifier parts, burns, distortions, while the pulse in the problems of this kind does not happen.The main reason for this is the duration of the current application. Both times alternating with the current value is to be expressed in terms of milliseconds. For example, high current value of 80msec to 100msec with a normal current value of the works. This transformation will continue during the study period. Working Pulse Output Flow Chart Application Areas;
|